Sorento V6-3.5L (2004)
CAUTION:
Never rotate the engine counter clockwise!
4.
Remove bolt from power steering return line bracket gently push the line rearward to gain access to the locking device on crankshaft pulley
holding tool.
5.
Insert crankshaft holding tool (K07U-SC072-SST-1 dowels into the crankshaft pulley assembly as shown in photo.
^
This procedure should be performed with the engine at ambient temperature. Do not perform this procedure on a hot engine.
6.
Rotate the lower leg and lock tool against the R/S frame rail to prevent the pulley from turning. Insert and screw the lock pin to prevent tool from
coming loose during procedure.