Sorento V6-3.5L (2004)
Fuel Pressure Release: Service and Repair
Priming the Fuel System
PRIMING THE FUEL SYSTEM
After fuel pressure has been released, system must be primed to avoid excessive cranking to restart the engine.
1. Connect the terminal 1 (FUEL PUMP) and terminal 5 (Battery+) of diagnostic connector with a jumper wire.
2. Turn IG ON for no longer than 10 seconds to pressurize system and check for fuel leaks. (Jumper wire gets if it is left in for longer than 10
seconds).
3. Turn IG OFF and remove jumper wire.