Sorento V6-3.5L (2004)
3. Install crankshaft sprocket and align the timing mark.
CAUTION: Be careful not to bend crankshaft sensing blade.
4. Install camshaft sprocket and adjust initial installation state as illustration.
5. Install auto tensioner to oil pump case.
NOTE: At this time auto tensioner's set pin should be assembled completely.
6. Align the timing marks of each sprocket and install the timing belt in this order. Crankshaft sprocket --> Idler pulley --> Exhaust camshaft sprocket
(LH) --> Intake camshaft sprocket (LH) --> Water pump pulley --> Intake camshaft sprocket (RH) --> Exhaust camshaft sprocket (RH) Tensioner
