Sorento V6-3.5L (2004)
Combination Switch: Service and Repair
Multi Function Switch
REMOVAL
Prior to removing of the multi function switch assembly in vehicles equipped with air bags, be careful to follow the following:
CAUTION:
-
Never attempt to disassemble or repair the air bag module or clock spring. If faulty, replace it.
-
Do not drop the air bag module or clock spring or allow contact with water, grease or oil Replace it a dent, crack, deformation or rust is detected.
-
The air bag module should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of it.
-
Do not expose the air bag module to temperatures over 93 °C (200 °F).
-
After deployment of an air bag, replace the clock spring with a new one.
-
Wear gloves and safety glasses when handing an air bag that has been deployed.