Sorento V6-3.5L (2004)
6.
Install new ADU control module, tighten retaining screw and nuts to 72~120 in-lbs (8~14 Nm). Connect electrical connector to the ADU.
7.
Install rear cup holder assembly, secure with retaining screw.
8.
Install center console storage bin and ashtray.
9.
Connect the negative battery cable.
10.
Turn ignition switch ON, verify lamp sequence. Lamp should blink six (6) times when the ignition switch is turned ON, then go off.
11.
Set the clock to the proper time. Program preset radio stations to the customer's preference as recorded in step one.
MIL OPERATING METHOD
AFFECTED PRODUCTION RANGE:
Sorento vehicles produced prior to 05/21/04.