Sorento V6-3.5L (2004)
Air Bag: Service and Repair
Air Bag Module (Driver Side)
REMOVAL
1. Disconnect the negative battery cable and keep secure from battery.
CAUTION: Wait at least 30 seconds after disconnecting the battery cable before doing any further work.
2. Remove the ignition key from the vehicle.
3. Remove the side protect cover of steering wheel and airbag module mounting bolts using a hexagonal wrench.
4. Remove the drive airbag module connector.
CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.