Sorento V6-3.5L (2004)
Using Voltmeter
TROUBLESHOOTING HINTS
It the fast idle speed is not adequate or the engine gives off dark smoke during warm-up, the engine coolant temperature sensor might be the cause.
INSTALLATION
1. Apply sealant LOCTITE 962T or the equivalent to the threaded portion.
2. Install the water temperature sensor and tighten it to the specified torque.
Tightening torque:
Engine coolant temperature sensor
20 - 40 Nm (200 - 400 kg.cm, 14 - 29 lb.ft)
3. Securely connect the harness connector.
