Sorento V6-3.5L (2004)
Stabilizer Bar: Service and Repair
Rear Stabilizer Bar
REAR STABILIZER BAR
REMOVAL
1. Support the bottom of the rear differential carrier with a jack.
2. Remove the stabilizer link mounting nut.
3. Remove the stabilizer bar bushing bracket.
INSTALLATION
1. Align the identification mark white paint on stabilizer bar with bushing and install the stabilizer bar bushing bracket.
Tightening torque: 19 - 23 Nm (1.9 - 2.3 kg-m, 13 - 16 ft. lbs.)