Sorento V6-3.5L (2004)
3. Using a hydraulic press, remove bearing housing from the output shaft.
4. Remove dust seal and then using a hydraulic press, remove bearing.
INSPECTION
^
Output shaft for damage.
^
Bearing for roughness or noise.
^
Dust seal for damage.
^
Bearing housing for cracks.
ASSEMBLY (OUTPUT SHAFT)
1. Install dust seal into bearing housing.
NOTE:
^
Apply the crease on the lip of dust seal.
2. Using a hydraulic press, install bearing onto output shaft.
3. Using a hydraulic press, install shaft with bearing into bearing housing.
