Sorento 2WD V6-3.3L (2008)
Front Door Panel: Service and Repair
Notice: There is no stand alone Front Door Panel article authored by the manufacturer. This information was extracted from the Front Door Removal
article.
Front Door Panel Removal and Installation
1. Disconnect negative battery cable.
2. Remove door inner handle cover.
1. Remove door inner handle cover screw (1).
2. Remove inner handle cover.
3. Remove outside rearview mirror garnish.
1. Remove garnish from door frame.
2. Disconnect electrical connector.
4. Remove assist grip cover. (only passenger side)
1. Remove assist grip cover.
2. Remove screws (2).