Sorento 2WD V6-3.3L (2008)
DISCRIMINATION OF CRANKSHAFT BEARING
SELECTION
4. Check crankshaft end play.
Using a dial indicator, measure the thrust clearance while prying the crankshaft back and forth with a screwdriver.
Standard end play
0.10 - 0.28mm (0.0039 - 0.0110in.)
If the end play is greater than maximum, replace the thrust bearings as a set.
Thrust bearing thickness
2.41 - 2.45mm(0.0949 - 0.0964in)
5. Inspect main journals and crank pins
Using a micrometer, measure the diameter of each main journal and crank pin.
Main journal diameter : 68.942 - 68.960mm(2.7142 - 2.7149in)
Crank pin diameter : 54.954 - 54.972mm(2.1635 - 2.1642in.)