Sorento 2WD V6-3.3L (2008)
4. Release the connector locking pin, then disconnect the driver airbag module connector(B).
CAUTION:
The removed airbag module should be stored in a clean, dry place with the pad cover face up.
5. Remove the steering wheel with SST (SST No. 09561-11001) after unfastening the mounting nut.
6. Remove the steering wheel column cover after unscrewing 3 screws.
7. Unscrew the clock spring tightening screws. (4EA)
8. Disconnect the clock spring wiring harness and the horn wiring harness connector from the clock spring.
INSTALLATION
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable from battery and wait for at least three minutes before beginning work.