Sorento 2WD V6-3.3L (2008)
10. After removing the four mounting bolts, remove the steering column shaft assembly.
11. Remove the four mounting bolts in the dust cover assembly.
12. Remove the bolt tightening the intermediate upper shaft and intermediate lower shaft, and then separate them apart.
13. After removing the bolt connecting the steering gear box with the intermediate lower shaft, separate the intermediate lower shaft from the gearbox.
REMOVAL
1. Drain the power steering fluid.
2. Disconnect the pressure tube and return tube.
Tightening torque:
32 - 48 Nm (3.2 - 4.8 kg-m, 23 - 34 lb-ft)
3. Remove the joint assembly connecting bolt.