Sorento 2WD V6-3.3L (2008)
10. Remove the lower arm.
BUSHING REPLACEMENT
1. For bushing removal, utilize a standard bearing press.
2. Install the new bushing using a standard bearing press.
NOTE:
Apply lubricant to the new bushings prior to installation.
INSTALLATION
1. Install the lower arm ball joint to the steering knuckle.
Tightening torque:
157-196 Nm (16-20 kg-m, 116-145 lb-ft).
2. Install a new cotter pin through the castle nut.
3. Position the lower arm to the front frame crossmember brackets and then position the spindle during lift up the steering gear box by using suitable
bar.
4. Install the lower arm spindles.
Tightening torque:
216-245 Nm (22-25 kg-m, 159-181 lb-ft).
NOTE:
Align the spindle to the numerical setting and marked location on the frame bracket and plate so the same setting and location is maintained.
5. Install the lower nut of the shock absorber.
