Sorento 2WD V6-3.3L (2008)
8. Remove the upper rubber seat.
INSTALLATION
1. Position the upper rubber seat to the coil spring.
CAUTION:
Align the spring end with the groove of the spring pad and fix the spring and the spring pad by adhering the 3 parts with tape.
2. Slowly raise the rear axle housing while installing the coil spring.
3. Install the shock absorber upper nut.
Tightening torque:
122-140 Nm (12.2-14 kg-m, 88-101 lb-ft).
4. Install the shock absorber lower bolt.
Tightening torque:
122-140 Nm (12.2-14 kg-m, 88-101 lb-ft).
5. Install the stabilizer link upper mounting nut to the specified length.