Sorento 2WD V6-3.3L (2008)
Axle Shaft: Removal and Replacement
Center Bearing And Inner Shaft
REMOVAL (OUTPUT SHAFT)
1. Remove diff mounting bracket.
2. Remove output shaft from differential housing.
INSTALLATION
1. Install output shaft to differential case.
Tightening torque :
80-120 Nm (8-12 kg-m, 58-86 lb-ft)
CAUTION:
-
Be carefully that oil seal does not damage by clip during install.
2. Install diff mounting bracket to the bearing housing.
Tightening torque :
110-150 Nm (11-15 kg-m, 80-108 lb-ft)
3. Tighten diff mounting bracket bolt.
Components and Components Location
COMPONENTS (T.S.J.-B.J.)