Sorento 2WD V6-3.3L (2008)
Axle Shaft: Overhaul
Disassembly
DISASSEMBLY
1. Remove axle clip using plier.
2. Remove output shaft housing.
3. Using a hydraulic press, remove bearing housing from the output shaft.
4. Remove dust seal and then using a hydraulic press, remove bearing.
Inspection
INSPECTION
-
Output shaft for damage.
-
Bearing for roughness or noise.
-
Dust seal for damage.
-
Bearing housing for cracks.
Reassembly
REASSEMBLY (OUTPUT SHAFT)
1. Install dust seal into bearing housing.
NOTE:
-
Apply the grease on the lip of dust seal.