Sorento 2WD V6-3.5L (2005)
The carrier assembly must be lifted and rotated slightly during removal.
NOTICE
Before reinstalling the differential carrier; clean and apply sealer (Three Bond 1215 or equivalent) to contact surfaces of rear differential carrier
assembly and the carrier housing.
12. Install components in reverse order of removal. Consult Shop Manual for tightening torque specifications.
Refill differential with correct type of gear oil, see notice below.
NOTICE
Gear Oil Specs: Hypoid Type
Conventional Differential: SAE90, API GL-5
With Limited Slip Differential: SAE85W90, API GL-5
AFFECTED PRODUCTION RANGE
PARTS INFORMATION
INSTALLATION
1. Apply specified sealant to axle housing flange surface, and install the differential carrier assembly.
Specified sealant : Three bond 1215 or equivalent
Tightening torque :
23-27Nm (2.3-2.7kg-m, 16-19lb-ft)
