Sorento 2WD V6-3.8L (2007)
Collision Avoidance Module: Testing and Inspection
Alarm Range
BACK WARNING CONTROL MODULE
ALARM RANGE
Upon detecting an object at each range out of 3 ranges as stated below within the operation range, it will generate alarm.
First alarm : Object comes near to the sensor located at the rear of vehicle, within 81-120 cm ± 15 cm
Second alarm : Object comes near to the sensor located at the rear of vehicle, within 41-80 cm ± 10 cm
Third alarm : Object comes near to the sensor located at the rear of vehicle, within 40 cm ± 10 cm
NOTE:
1. Time tolerance of the above wave form : Time ± 10 %
2. At nearer distance than 40 cm, detection may not occur.
3. Alarm will be generated with vehicle reversing speed 10 km/h or less.
For moving target, maximum operation speed shall be target approach speed of 10 km/h.
4. When the vehicle or the target is moving, sequential alarm generation or effective alarm may be failed.
5. False alarm, or failure of the alarm to trigger may occur in the following conditions.
-
Irregular road surface, gravel road, reversing toward grass.
-
Horn, motor cycle engine noise, large vehicle air brake, or other object generating ultrasonic wave is near.
-
When a wireless transmitter is used near to the sensor.
-
Dirt on the sensor.
-
Sequential alarm may not occur due to the reversing speed or the target shape.
