Sorento 2WD V6-3.8L (2007)
5. Pump the brake pedal several times, and then loosen the bleeder screw until fluid starts to run out without bubbles. Start with bleeder screw
furthest away from master cylinder. Then close the bleeder screw.
6. Repeat step 5 until there are no more bubbles in the fluid for each wheel.
7. Tighten the bleeder screw.
Bleed screw tightening torque:
7-13 Nm (0.7 -1.3 kgf-m, 5.1 - 9.4 lb-ft)