Sorento 2WD V6-3.8L (2007)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C PRESSURE TRANSDUCER
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Recover the refrigerant with a recovery/charging station.
3. Remove the front bumper.
4. Disconnect A/C pressure transducer connector (3P) (A)
5. Remove the A/C pressure transducer.
CAUTION: Take care that liquid & suction pipe are not bent.
6. Installation is the reverse order of removal.
TORQUE: 10-12 N.m (1.0-1.2 kgf.m, 7.4-8.8 lbf.ft)
