Sorento 2WD V6-3.8L (2007)
Fuel Pressure Regulator: Service and Repair
FUEL PUMP
REMOVAL(INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR)
1. Preparation
1. Fold the rear seat cushion.
2. Open the carpet (A)
3. Remove the service cover (B).
4. Disconnect the fuel pump connector (A).
5. Start the engine and wait until fuel in fuel line is exhausted.
6. After engine stops, turn the ignition switch off.
2. Disconnect the fuel feed quick-connector (A) and the fuel tank pressure sensor connector (B).
3. Remove the rubber cover (C).