Sorento 2WD V6-3.8L (2007)
Accelerator Pedal Switch: Service and Repair
ACCELERATOR PEDAL
Removal
1. Turn ignition switch off and disconnect the battery (-) cable from the battery.
2. Disconnect the accelerator position sensor connector (A).
3. Unfasten the mounting bolt/nuts (B) and remove the accelerator pedal from the vehicle.
Installation
1. Install the accelerator pedal in according to the reverse order of "REMOVAL" procedure.
Accelerator pedal mounting nuts: 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 Ibf.ft)