Sorento 2WD V6-3.8L (2007)
5. Remove the wiring over the surge tank.
1) Disconnect the injection harness connector(A).
2) Disconnect the camshaft position sensor(CMP) harness connector(B).
3) Disconnect the ground line(C).
4) Disconnect the ignition coil harness connector(D).
5) Disconnect the condensor connector(E).
6) Disconnect the variable induction system(VIS) solenoid valve connector(G).
7) Disconnect the oil control valve(OCV) harness connector(F).
8) Disconnect the injector wiring(H) and ignition coil wiring(I).
