kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Diagnosis|Page 37 > < Diagnosis
Page 2
background image

1. Waveform for a normal sensor connection

2. Waveform for a failed sensor connection

NOTE:  Sensor connection will be checked for oscillating period of input signal 3 V. If oscillating period is more than 0.8 ms, it is normal.

a. Left sensor failure : beep-beep-beep
b. Right sensor failure : beep beep-beep beep-beep beep
c. Rear-right sensor failure : beep beep beep-beep beep beep-beep beep beep
d. Right side sensor failure : beep beep beep beep-beep beep beep beep-beep beep beep beep

WARNING:

1. Range detected by back sensors is limited. Watch back before reversing
2. There is a blind spot below the bumper. Low objects (for example boundary barrier) may be detected from minimum 1.2 m away unable to detect

at nearer.

3. Besides there are some materials unable to be detected even in detection range as follows.

1. Needles, ropes, rods, or other thin objects.

Diagnosis|Page 37 > < Diagnosis