Sorento 2WD V6-3.8L (2007)
9. If the vehicle rear wiring is rerouted or electrical component is added at the rear part.
10. Vehicle balance is changed due to the replacement of the rear spring.
11. The unit will operate normally when the vehicle speed is 5 km/h or less.
Above this speed, the unit may not operate normally.
6. Check the rear bumper for installation condition and deformation. If installed improperly or the sensor orientation is deviated, it may cause
malfunction.
7. Be careful not to apply shock during sensor installation on the transmission or reception unit.
8. When adding electrical devices or modifying harness at the rear body of the vehicle, ensure not to change the transmission and reception unit
wiring.
Tagging the transmission side and reception side, it may cause malfunction.
9. High power radio transmitter (above 10 W) may cause malfunction. Do not install it on the vehicle.
10. Be careful that excessive heat or sharp objects shell not touch ultrasonic sensor surface.
Do not cover the sensor opening or press the sensor.
