Sorento 2WD V6-3.8L (2007)
6. Install the center pillar trim.
7. Install the door scuff trim.
8. Install the lower anchor bolt.
Tightening torque: 4.0 - 5.5 kgf.m (39.2-53.9 N.m, 28.9-39.8 lb.ft)
9. Reconnect the battery negative cable.
10. After installing the Seat Belt Pretensioner (BPT), confirm proper system operation:
-
Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.