Sorento 2WD V6-3.8L (2007)
4. Remove the piston rod nut and each part as shown.
INSPECTION/REBUILD
Inspect the following points and replace defective component parts as necessary.
1. Secure a handle to the shock absorber piston rod and compress and lift the rod three times with a constant speed. Inspect for uniform working
force and abnormal noise.
2. Inspect the entire shock absorber for signs of oil leakage; replace if required.
3. Inspect the coil spring for stress cracks and/or other damage.
4. Inspect for damage or deterioration of the upper and lower bushes.
