Sorento 2WD V6-3.8L (2007)
1. After making sure identification mark on the spring seat. Position the spring and shock absorber assembly into the upper mounting block.
2. Install the mounting block nuts by 3 - 4 threads only.
3. Insure the front of the vehicle is raised and supported with safety stands.
4. Tighten the lower nut of the shock absorber.
Tightening torque: 122 - 140 Nm (12.2 - 14 kg-m, 88 - 101 ft. lbs.).
5. Position the upper arm to the frame brackets, insert the bolts and hand tighten the nuts.
6. Install the upper arm ball joint into the top of the steering knuckle and tighten the side bolt and nut.
Tightening torque: 44 - 55 Nm (4.4 - 5.5 kg-m, 31 - 39 ft. lbs.).