Sorento 4WD V6-3.3L (2008)
Valve Clearance: Adjustments
VALVE CLEARANCE INSPECTION AND ADJUSTMENT
NOTE:
Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C) and cylinder head is installed on the cylinder block.
1. Remove the engine cover(A).
2. Remove the engine room resonator(A).
3. After disconnecting the MAF sensor connector(A) and the breather hose(B), remove the air cleaner assembly(C).
4. Disconnect the other breather hose(A), the Purge Control Solenoid Valve(PCSV) hose, the Positive Crankcase Ventilation (PCV) hose(C) and the
Electronic Throttle Control(ETC) cooling hoses(D) and connector(E).
