Sorento 4WD V6-3.3L (2008)
5. Remove the wiring over the surge tank.
(1) Disconnect the injection harness connector(A).
(2) Disconnect the camshaft position sensor(CMP) harness connector(B).
(3) Disconnect the ground line(C).
(4) Disconnect the ignition coil harness connector(D).
(5) Disconnect the condenser connector(E).
(6) Disconnect the variable induction system(VIS) solenoid valve connector(G).
(7) Disconnect the oil control valve(OCV) harness connector(F).
(8) Disconnect the injector wiring(H) and ignition coil wiring(I).
6. Disconnect the fuel hose tube(A).
7. Remove heater hose(A) and disconnect the brake vacuum hose(B).
8. Disconnect the surge tank stay.
9. Remove the surge tank.
10. Loosen the cylinder head cover bolts and then remove the cover(A) and gasket.
