Sorento 4WD V6-3.3L (2008)
MANUAL MODE ECM UPGRADE PASSWORDS:
7. When the GDS tool reports that the ECU upgrade has been successfully completed, click OK, turn OFF the ignition key, and wait at least 10 seconds
before attempting to start the engine.
8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored in the Engine and Transaxle control modules.
9. Road test when complete to ensure proper installation of the TP sensor and base setting of transaxle adaptive reset since reflash of PCM was
performed. This only applies to vehicles with PCM, vehicles with ECM and TCM do not require transaxle adaptive learning.
