Sorento 4WD V6-3.3L (2008)
3. Connect the Main 16~pin DLC cable (GHDM - 241000) to the OBD-II connector, located under the driver's side of the instrument panel.
4. Turn on the VCI and diagnostic terminal with the ignition key in the ON position.
AUTOMATIC UPGRADE PROCEDURE
5. Choose VIN or ECU Upgrade on the initial screen.
Enter the vehicle information by pressing the VIN Auto Detect button, entering the vehicle's VIN or selecting the vehicle model, model year,
engine/fuel type and ENGINE as the system; then click OK.
6. Once back at the ODS Main Screen select ECU Upgrade, then select Auto Mode, and then ENGINE in the left ECU Upgrade column, then perform
the ECU upgrade in accordance with normal GDS tool ECU upgrade procedures.
MANUAL UPGRADE PROCEDURE
