Sorento 4WD V6-3.3L (2008)
Air Bag: Removal and Replacement
Components and Components Location
COMPONENTS
Repair Procedures
REMOVAL
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2. Remove the following parts.
A. Side trim, Roof trim
3. Disconnect the Curtain Airbag harness connector.
4. After loosening the mounting bolts(6EA) and nut (1EA) remove the curtain airbag.
INSTALLATION
1. Remove the ignition key from the vehicle.
2. Disconnect the battery negative cable and wait for at least three minutes.
3. Tighten the CAB mounting bolts (6EA) and nut (1EA).
Tightening torque
: 0.8 - 1.2 kgf.m(7.8 - 11.8 Nm, 5.8 - 8.7 lb.ft)
