Sorento 4WD V6-3.3L (2008)
- Reprogramming has already been performed. Check previous service records for compleion.
7. After completion of reprogramming, disconnect the electrical connection at the power supply and reconnect OCS seat connector. Install the seat track
trim cover as required.
8. Perform a functional check of the OCS system:
a) Turn the ignition switch OFF for 5 seconds.
b) Turn the ignition switch ON. Monitor the tell-tale lamp on the center facia panel. The "PASSENGER AIR BAG OFF" indicator should illuminate
initially, then turn OFF and back ON again.
c) Ensure the SRS warning lamp is not illuminated on the instrument cluster.
9. After the completion of reprogramming, open the hood and check for SC076 campaign completion label on the panel to the left of the master cylinder.
10. Refer to TSB GENERAL 020 "'Passenger Air Bag Off' Indicator Light Operation" and the Kia brochure titled "Understanding Your Safety Belt &
Air Bag Supplemental Restraint System" (part no. UN070-KU-002) for proper OCS-related seating position instructions.
TOOLS INFORMATION
- Operation Code And Time
WARRANTY CLAIM INFORMATION
