Sorento 4WD V6-3.3L (2008)
2. Remove the generator cover(A) after removing the three nuts(B).
3. Remove the brush holder(A).
4. Remove the four screws, the rectifier(B) and the rubber seal(C).
5. Remove the four nuts(A) and insulators(B).
2. Remove the generator cover(A) after removing the three nuts(B).
3. Remove the brush holder(A).
4. Remove the four screws, the rectifier(B) and the rubber seal(C).
5. Remove the four nuts(A) and insulators(B).