Sorento 4WD V6-3.3L (2008)
2. Install the oil seal in the pump body by using the special tool.
3. After inserting the shaft assembly into the pump body.
4. Install the outer and inner O-ring in the pump body.
5. Insert the oil pump side plate in the pump body.
6. Install the rotor to the shaft with the rotor's identification mark facing upward.
7. Install the cam ring so that its identification mark is facing downward.
8. Install the vanes (10 pieces) to the rotor, with the R part of the vanes facing outward.
9. Install the O-ring and oil pump cover assembly.
10. Install the suction pipe and O-ring.
