Sorento 4WD V6-33L (2008) Steering Gear Removal and Replacement
Steering Gear: Overhaul
Disassembly
REASSEMBLY
DISASSEMBLY AND REASSEMBLY
1. If it is necessary to remove the key lock assembly, use a pinch to make a groove on the head of the special bolt, and then use a screwdriver to
remove the key lock assembly mounting bracket.
2. Disassemble the key lock assembly from the steering column shaft.
3. Reassembly is the reverse of disassembly.
DISASSEMBLY
1. Remove the feed tube.
2. Remove the tie rod end from the tie rod.
3. Remove the dust cover from the ball joint.
