Sorento 4WD V6-3.3L (2008)
2. Connect 'TPMS exciter' to the diagnostic connector.
3. Register the four sensor's ids to the receiver.
4. Disconnect diagnostic link.
5. Cycle Ignition, wait 3 minutes and check that Normal Receiver State is now indicated.
6. Let each road tire down and check that the system turns the TREAD lamp and correct wheel location LED on accordingly (wait up to 3 minutes).
If it does not, then turn wheel a quarter turn and re-check.
7. In the case that re-check does not work, use the handheld tool to check that the correct ID has been registered for each wheel.
