Sorento 4WD V6-3.3L (2008)
4. ADJUSTMENT OF PINION HEIGHT
Adjustment the drive pinion height by the following procedure.
(1) For assembly of pinion, use drive pinion model(0K993 270 A01), pinion height adjustment gauge body(0K993 270 A09) and gauge block(ht.
28 mm(1.102 in)).
(2) Assemble spacer and inner bearing inner race to pinion model and fix it with O-ring.
NOTE:
Use spacer disassembled.
(3) Install pinion model assembly to carrier.
(4) Assemble outer bearing, companion flange washer, and lock nut.
NOTE:
Use washer and lock nut disassembled.
(5) Tighten lock nut.
NOTE:
-
Tighten to the extent the companion flange can be screwed by hand.
(6) Put pinion height adjusting gauge body at right angle and adjust it to 0.
