Sorento 4WD V6-3.5L (2011)
Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always follow the instructions given on the GDS tool in either Auto or
Manual mode. See table for Manual Mode password.
MANUAL MODE ECU UPGRADE PASSWORDS
Do NOT perform Manual Mode ECU upgrade unless Auto Mode fails.
Do NOT force the calibration into the incorrect P/N PCM, this is subject to warranty chargeback.
7. Within the ECU Upgrade screen, select Manual Mode in the left column, then select the appropriate 127.11MY XMA M/T ESC UPDATE. Select the
appropriate control unit part number with reference to the ROM ID Information Table and click OK.
8. Enter the appropriate password from the table below, and then click OK.
9. Upgrade will begin and the progress of the upgrade will appear on the bar graph.
Upgrade will occur until 100% is reached on the bar graph. Turn the ignition key OFF for10 seconds, place it back in the ON position and then click
OK to continue according to Information displayed on the screen.
10. Click OK on the final screen, which indicates upgrade is complete.
11. Check if any incidental Diagnostic Trouble Codes (DTC) have been created by the upgrade, and clear the DTC (s) present.
AFFECTED PRODUCTION RANGE
WARRANTY CLAIM INFORMATION
