Sorento 4WD V6-3.8L (2009)
Intake Manifold: Specifications
Intake Manifold specifications
Intake Manifold
Tightening torque
1st.......................................................................................................................................................................3.9 - 5.9 Nm (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)
2nd
Bolt.............................................................................................................................................................26.5 - 31.4 Nm (2.7 - 3.2 kgf.m, 19.5 - 23.1 lb-ft)
Nut..............................................................................................................................................................18.6 - 23.5 Nm (1.9 - 2.4 kgf.m, 13.7 - 17.4 lb-ft)
3rd...........................................................................................................................................................................................Repeat 2nd step twice or move.
NOTE:
Be careful of the installation direction.
a - h......................................................................................................................................................................................................................1st step order
1 - 8....................................................................................................................................................................................................................2nd step order
Tightening torque
Long bolt...................................................................................................................................................9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 lb-ft)
Short bolt, nut.............................................................................................................................................18.6 - 23.5 Nm (1.9 - 2.4 kgf.m, 13.7 - 17.4 lb-ft)
