Sorento 4WD V6-3.8L (2009)
CAUTION:
-
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of 1 arrow.
-
After tapping the SST with a plastic hammer along the direction of 2 arrow around more than 2/3 edge of the oil pan, remove it from the ladder
frame.
-
Do not turn over the SST abruptly without tapping. It can result in damage of the SST.
9. Remove the crankshaft damper pulley(A).
10. Remove the timing chain cover(A).
NOTE:
-
Be careful not to damage the contact surfaces of cylinder block, cylinder head and timing chain cover.
-
Mark on the timing chain on the basis of the marking on sprocket and CVVT.
11. Install a set pin after compressing the timing chain tensioner.
12. Remove RH cam-to-cam guide(A).