Sorento 4WD V6-3.8L (2009)
NOTE:
-
Make clean the contact face before assembly.
-
When replacing a water pump, always use new gasket(1, 2).
-
When reassembling a water pump, replace the bolt(B) with a new one.
2. Install the 4 bolts and pump pulley(A).
Tightening torque
7.84 - 9.80Nm (0.8 - 1.0kgf.m, 5.78 - 7.23lb-ft)
3. Install drive belt(A).
4. Fill with engine coolant.
5. Start engine and check for leaks.
6. Recheck engine coolant level.
