Sorento 4WD V6-3.8L (2009)
Canister Purge Solenoid: Testing and Inspection
Purge Control Solenoid Valve (PCSV)
INSPECTION
FUNCTION AND OPERATION PRINCIPLE
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a
solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is
transferred to the intake manifold.
SPECIFICATION
SCHEMATIC DIAGRAM
COMPONENT INSPECTION
1. Turn ignition switch OFF.
2. Disconnect PCSV connector.
3. Measure resistance between PCSV terminals 1 and 2.
4. Check that the resistance is within the specification.
Specification: Refer to SPECIFICATION.
