Sorento 4WD V6-3.8L (2009)
4. After aligning the marks on the steering shaft and wheel, remove the steering wheel.
CAUTION:
Do not hammer on the steering wheel to remove it; it may damage the steering column.
5. After removing the three screws in the illustration, remove the steering column upper and lower shrouds.
6. After removing the screws in the illustration, remove the clock spring.
7. Remove the connectors from the multifunction switch and the multifunction switch.
8. Remove the lower crash pad.
9. Remove the bolt connecting the steering column shaft assembly with the intermediate upper shaft, and then separate them apart.
