Sorento 4WD V6-3.8L (2009)
20. Remove the rack stopper, rack bushing and rack from the rack housing by moving it toward the piston side.
CAUTION:
When the rack has been removed, be sure to replace the housing side oil seal with a new one.
21. Remove the O-ring from the rack bushing.
22. Remove the oil seal from the rack bushing.
Inspection
INSPECTION
1. Check the steering column shaft for damage and deformation.
2. Check the connections for play, damage and smooth operation.
3. Check the ball joint bearing for wear and damage.
Reassembly
REASSEMBLY
DISASSEMBLY AND REASSEMBLY
1. If it is necessary to remove the key lock assembly, use a pinch to make a groove on the head of the special bolt, and then use a screwdriver to
remove the key lock assembly mounting bracket.