Sorento 4WD V6-3.8L (2009)
3. REMOVAL OF DRIVE GEAR
A. Make the matchmarks to the differential case and the drive gear.
B. Loosen the drive gear attaching bolts in diagonal sequence to remove the drive gear.
4. REMOVAL OF LOCK PIN (FOR CONVENTIONAL DIFFERENTIAL)
5. REMOVAL OF SELF-LOCKING NUT
6. REMOVAL OF DRIVE PINION
A. Make the matchmarks to the drive pinion and companion flange.
CAUTION:
Matchmarks should not be made to the contact surfaces of the companion flange and the propeller shaft.
B. Drive out the drive pinion together with the drive pinion spacer and drive pinion front shims.
7. REMOVAL OF DRIVE PINION INNER BEARING INNER RACE
