Soul L4-2.0L (2010)
5. With the Air Vent Remover tool properly secured to the rear of the vent, pull on the handle along a horizontal angle. Vents that have not previously
been removed may take extra effort to remove.
SOUL - Center Vent Removal
1. Remove the center fascia.
2. Remove two phillips screws beneath the center fascia that hold the vent in place.
3. Insert the Air Vent Remover (09840-1M100) into the air vent as marked.
NOTICE
4. The Air Vent Remover (09840-1M100) should grasp the inside of the vent.
