Soul L4-2.0L (2010)
Tire Pressure Sensor: Service and Repair
Removal
Removing The Tire From The Rim
CAUTION:
During all the operations on the tire, the sensor must be correctly maintained and thus it is FORBIDDEN to unscrew the nut and to force the sensor into
the wheel. This could damage the sensor.
1. Take off the first side of the tire. The tool should not be used near the valve (no less than 30 cm).
2. Take off the second side of the tire. The tool should not be used near the valve (No less than 30 cm).
3. Dismount the first side of the tire: Place the shoe of the tool between 5 and 15 cm away from the sensor and use the tire lever as shown in the
picture.
4. By using the tire lever, extract the external side wall of the tire and engage on the shoe of the machine. The lever and the tire must not come into
contact with the sensor. Then remove the lever.
5. The wheel rotation allows the complete extraction of the first side of tire.